5
Quick Reference
Installing New or Recharged Batteries
Caution: To ensure proper terminal operation, use ONLY the
Symbol Li-Ion battery in the PDT 7500.
To install a new or recharged Li-Ion
battery:
1. Hook the base of the new bat-
tery in the top of the battery
compartment, then press into
place.
2. Slide the battery latch to secure
the battery.
If the battery latch is not closed, do not operate the terminal,
otherwise data may be lost.
Caution: Do not expose the battery to temperatures in excess of
140°F (60°C). Do not disassemble, incinerate, or short
circuit the battery.
Removing the Battery from the Terminal
To remove the Li-Ion battery from the
terminal:
1. Suspend the terminal’s power.
2. Slide the battery release switch
towards the top of the terminal
until the lock releases.