- 16 - EN
1C29
5Select the year
Press the Arrow button Kor L
until your desired year appears.
(Example: 2004)
Then press the Arrow button B.
6Select the hour
Press the Arrow button Kor L
until your desired hour appears.
(Example: 5, PM)
Then press the Arrow button B.
7Select the minute
Press the Arrow button Kor L
until the desired minute appears.
(Example: 40)
8Start the clock
Press the SETUPbutton on the
remote control.
Although seconds are not dis-
played, they begin counting from
00 when you press the SETUPbut-
ton on the remote control. Use this
feature to synchronize the clock with the correct
time.
NOTE:
When unplugging the AC cord or if there is a power
failure for more than 3 seconds, you may have to
reset the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock,
1)Follow steps [1] to [2].
2)Select where you want to change using the Arrow
button B.
3)Enter correct numbers using the Arrow button K
or L.
4)Press the SETUP button on the remote control to
start the clock.
PLEASE NOTE:
If there is no local PBS station in your area or on
your cable system, select “AUTO CLOCK” and
press the ENTER button to turn [OFF] this function.
Then you can manually adjust the clock.
AUTOMATIC CLOCK SETTING
Make sure ...
•The TV/VCR/DVD is turned on.
•Confirm the TV/VCR/DVD is receiving a RF
(Radio Frequency) signal from either an antenna or
cable system connection using the ANT. terminal
on the rear of the TV/VCR/DVD.
NOTE:
•If a cable converter box is being used, make sure it
is powered on.
•You must use the TV/VCR/DVD remote control to
perform the clock setting procedure.
•If the TV/VCR/DVD is connected directly to a
cable converter box or satellite box, the local PBS
station must be selected on the cable box itself and
the TV/VCR/DVD must be set to the output chan-
nel of the cable converter box or satellite box (usu-
ally channel 3 or 4), to be able to set up or correct
the clock automatically.
1Select “SETTING CLOCK”
Press the SETUPbutton on the
remote control.
Press the Arrow button Kor Lto
select “SETTING CLOCK”.
Press the ENTER button to enter
“SETTING CLOCK” menu.
2Set “AUTO CLOCK”to [ON]
Press the Arrow button Buntil
“AUTOCLOCK [ON]” appears.
3Begin “AUTO CLOCK CH SEARCH”
Press the Arrow button Lto select
“AUTO CLOCK CH SEARCH”.
Press the ENTER button.
•The TV/VCR/DVD is now
searching for the station which
contain the auto clock set signal.
The search for a signal may take up to 20
seconds per channel.
•“_ _” appears at the lower left of
the screen when the search has
ended.
•Auto Clock station- write down
the number(s) that appear on the
screen. These are the auto clock
station(s) in your area. See step [4] on page 17.
•If no number(s) appear on the TVscreen, there are
no stations in your area which contain the Auto
Clock signal. Auto Clock Setting is not possible.
Please use Manual Clock Setting on page 15.
Press the SETUPbutton to exit the screen.
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 THU 2 0 0 4
HOUR MINUTE
0 5 : – – PM
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 THU 2 0 0 4
HOUR MINUTE
0 5 : 4 0 PM
5:40 PM
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 THU 2 0 0 4
HOUR MINUTE
– – : – – – –
– SETTING CLOCK –
BAUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
D.S.T. [OFF]
– SETTING CLOCK –
AUTO CLOCK [ON]
BAUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
D.S.T. [OFF]
– AUTO CLOCK CH SEARCH –
08 10 13
_ _
- TV/VCR SETUP -
TIMER PROGRAMMING
BSETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH