Symphonic MGTD204 , , , , TIMER PROGRAM EXTENSION

- 33 - EN

1C29

To shift the time schedule of an automatic timer

recording.

1)Press the POWER button.

2)Repeat step [1] on page 32.

3)Press the RECORD button and select the desired

program using the Arrow button Kor L.

4)Press the RECORD button again.

Each additional push will shift forward the

begin/end time for recording by 10 minutes. When

the recording is already in progress, each additional

push will shift forward the end time only. If you

want to cancel while setting, press the PAUSE but-

ton on the remote control. The recording time

returns to the original time.

NOTE: When you shift forward the time schedule

during recording, the recording speed will automati-

cally be set to the SLPmode.

5)Press the ENTER or RETURN button to exit the

setting menu. Then press the SETUPbutton on the

remote control to return to original mode.

TO CORRECT A PROGRAM

•While setting a program; press the Arrow button

sto go back one step and enter the correct num-

bers using the Arrow button Kor L.

•After setting a program;

1)Press the POWER button.

2)Repeat steps [1] to [2] on page 32.

3)Press the Arrow button B(or press the Arrow

button sto go back one step) until the part you

want to correct begins flashing, then make the

changes pressing the Arrow button Kor L.

4)Press the POWER button to set automatic timer

recording.

TO CANCEL AN AUTOMATIC TIMER

RECORDING

•After setting a program;

1)Press the POWER button.

2)Repeat steps [1] to [2] on page 32 and select a

program you want to cancel.

3)Press the C.RESET button.

4)Press the SETUP button on the remote control to

return to TVmode.

•While recording is in progress;

1)Press the POWER button.

2)Press the STOP/EJECT button on the

TV/VCR/DVD.

TV/VCR

5Set beginning hour

Press the Arrow button Kor Luntil

the desired hour appears.

(Example: “ 7, PM” for 7:30PM)

Then press the Arrow button B.

6Set beginning minute

Press the Arrow button Kor Luntil

the desired minute appears.

(Example: “30” for 7:30PM)

Then press the Arrow button B.

7Set end hour

Press the Arrow button Kor Luntil

the desired hour appears.

(Example: “8, PM” for 8:50PM)

Then press the Arrow button B.

8Set end minute

Press the Arrow button Kor L

until the desired minute appears.

(Example: “50” for 8:50PM)

Then press the Arrow button B.

9Set the tape speed

Press the Arrow button Kor L

until the desired tape speed

appears. (Example: SP)

10 Finish setting the program

Press the ENTER or RETURN button. The program

is now completed.

•To set another program, repeat steps [2] to [10].

•Press the SETUPbutton on the remote control to

return to original mode.

11 Set the timer

Press the POWER button to set automatic timer

recording. The Recording indicator lights up.

•You must turn off the TV/VCR/DVD to activate

automatic timer recording.

If power is not turned off and you continue watch-

ing TV, “TIMER REC STANDBY” starts flashing

on the TVscreen 2 minutes before the programmed

start time.

TIMER PROGRAM EXTENSION

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 7/04 SUN 7:12PM-:- - - -

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 7/04 SUN 7:30PM-:- - - -

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 7/04 SUN 7:30PM8:30PM- -

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 7/04 SUN 7:30PM8:50PM- -

- - -/- - - - - -:- - -:- - - -

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

B61 7/04 SUN 7:30PM8:50PMSP

- - -/- - - - - -:- - -:- - - -