Symphonic SC313C, SC319C Hints for Automatic Timer Recording, Wake UP Timer, Auto Return

TO CANCEL AN AUTOMATIC TIMER RECORDING

•After setting a program; 1)Press the POWER button.

2)Repeat steps [1] ~ [2] on page 21 and select a program you want to cancel.

3)Press the T-PROG. CLEAR button.

4)Press the MENU button on the remote control to return to TV mode.

•While recording is in progress; 1)Press POWER button.

2)Press the STOP/EJECT button on the TV/VCR.

TO CHECK THE BEGIN/END TIME

1)Press the POWER button so that the REC indicator goes off.

2)Press the MENU button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the F.FWD/B button. The details of pro-

grams appear on the TV screen.

5)Press the MENU button on the remote control to return to TV mode.

HINTS FOR AUTOMATIC

TIMER RECORDING

2 Set “AUTO RETURN” to [ON]	– USER’S SET UP –
Press the PLAY/K or STOP/L but-	RENTAL	[OFF]
ton to point to “AUTO RETURN”.
	REPEAT PLAY	[OFF]
	B AUTO RETURN	[ON]

Press the F.FWD/B or REW/s button until [ON] appears.

3Auto Return will begin

When all the timer recordings are completed, the TV/VCR will rewind to the beginning of the recorded program(s).

NOTE:

•If you press the POWER button while tape is rewinding, the Auto Return will stop.

4Watch the recorded program

Press the PLAY button.

TO CANCEL THE AUTO RETURN MODE

Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button.

If there is a power failure of any kind, the unit will retain its memory for this feature.

• Make sure the channel you want to record is prop-	WAKE UP TIMER
erly set in advance.	The Wake Up Timer function turns on the TV/VCR
• It is not necessary to press the RECORD button for
	without using the POWER button after a desired
timer recording.
	period of time.
• Recording begins automatically at the Start time.
	NOTES:
• If you are recording using a Timer mode, you may
	• Use the remote control for this procedure.
not operate the unit manually.
	• Clock must be set to the correct time before setting
• The erase-prevention tab on the cassette must be in
	the timer.
place (or you must put tape over the hole).
	• If you want to select [TAPE], you must insert a
• If the erase-prevention tab is removed, the cassette
	cassette tape in the TV/VCR. The tape will start
will be ejected when the POWER button is pressed
	playback automatically on your desired time.
to off.

•If the tape runs out before the end time, the

TV/VCR will switch to the Stop mode immediate-			1 Select “WAKE UP TIMER”
ly, and the tape will be ejected.		Press the WAKE UP/SLEEP button
		on the remote control once, and
AUTO RETURN		confirm “ON/OFF” is pointed.
		Press the F.FWD/B or REW/s		WAKE UP BON/OFF		[ON]
				TIMER	TV/TAPE	[TV]
With this feature, after timer recording is finished,		button until [ON] appears.			TIME	[12:00AM]
the beginning of the recorded program(s) can be
searched for automatically.			2 Select “TV” or “TAPE”
		Press the PLAY/K or STOP/L but-
1 Select “USER’S SET UP”
	– M E N U –	ton until to point to “TV/TAPE”.
Press the MENU button on the	TIMER PROGRAMMING	Press the F.FWD/B or REW/s
	SETTING CLOCK
	PICTURE CONTROL
remote control.	CHANNEL SET UP	button, and select [TV] or [TAPE].		TIMER	BTV/TAPE	[TV]
	B USER’S SET UP			WAKE UP	ON/OFF	[ON]
Press the PLAY/K or STOP/L but-	V-CHIP SET UP				TIME	[12:00AM]
	LANGUAGE [ENGLISH]
	CAPTION [OFF]
ton to point to “USER’S SET UP”.	ZERO RETURN
	TIME SEARCH
Then, press the F.FWD/B button.
	- 23 -					EN

9I03