PLAYING A DISC

Track Selection

Subtitle Language

MP3

1Press SEARCH MODE during playback.

The FILE LIST will appear.

2Select a desired track using Arrow (L/K/B/s).

Press B when you want to go to the next hierarchy.

Press s when you want to go back to the previous hierarchy.

3Press PLAY to start playing

NOTES:

Press SEARCH MODE to EXIT.

Some selections may take a while to be recognized.

Random Playback

MP3

1Press MODE twice while playback is stopped.

2Press PLAY to play the tracks in random order.

DVD-V

The DVD player allows you to select a language for subtitle during DVD disc (if available) playback.

1Press SUBTITLE during playback.

2Press SUBTITLE repeatedly to select your desired subtitle language.

The selected language will be displayed on the display bar at the top of the screen.

3To turn off subtitles, press SUBTITLE repeatedly until OFF appears.

NOTES:

Pressing AUDIO may not work on some DVDs with multiple audio languages (e.g. DVDs which allow audio language set- ting on the disc menu).

Some discs allow audio language setting/subtitle language setting on the disc menu. (Operation varies between discs, so refer to the manual accompanying the disc.)

If the desired language is not shown after pressing SUBTITLE several times, the disc does not have subtitles in that language.

If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Subtitle language setting. If you choose any other lan- guages, ‘---’ will be displayed instead. (Refer to page 14.)

Program

MP3

This feature allows you to program a mp3 disc to play in a desired sequence.

1Press MODE during playback is stopped.

The PROGRAM screen will appear.

2Press K or L to select a track, then press ENTER, to save it in a program.

Press CLEAR to erase the incorrect input.

3Press PLAY to start programmed playback.

Audio Language

DVD-V

The DVD player allows you to select a language during DVD disc (if multi language available) playback.

1Press AUDIO during playback.

2Press AUDIO repeatedly to select your desired language.

Stereo Sound Mode

CD

1Press AUDIO repeatedly during playback to select between STEREO, L-CH or R-CH.

STEREO - both right and left channels are active (stereo) L-CH - only left channel is active

R-CH - only right channel is active

NOTE:

If the Virtual Surround setting is ON, the sound mode will be fixed to STEREO, and can not be changed.

Camera Angle

DVD-V

Some DVD discs contain scenes which have been shot simulta- neously from various angles. You can change the camera angle

when the ( ) icon appears on the screen.

1Press ANGLE during playback.

The selected angle will be displayed on the display bar at the top of the screen.

2Press ANGLE repeatedly to select your desired angle.

Changing the On-Screen Display

DVD-V

You can check information about the current disc by pressing DISPLAY on the remote control.

1 Press DISPLAY during play-

9/49 0:00:00 -0:00:00

back to show current Chapter.

 

The elapsed and remaining

playing time of the current chapter will be displayed.

2Press DISPLAY again to show current Title.

The elapsed and remaining playing time of the current title will be displayed.

3Press DISPLAY the third time.

The BIT RATE and the current repeat setting will be displayed.

If you are playing a dual layered disc, the layer number will also be displayed ( L0: Layer 0 is playing. L1: Layer 1 is playing).

4Press DISPLAY the fourth time to remove the display.

CD

1Press DISPLAY during playback, the current Track will be displayed on the TV screen.

The elapsed and remaining playing time of the current track will be displayed.

2Press DISPLAY again to show current Total Track.

The elapsed and remaining playing time of the current total track will be displayed.

3Press DISPLAY the third time to remove the display.

– 12 –

EN

Page 12
Image 12
Symphonic SD300D Track Selection, Audio Language, Stereo Sound Mode, Camera Angle, Changing the On-Screen Display