Symphonic ST423E owner manual Preparation for USE, Operations

PICTURE CHANNEL SET [ENGLISH] ESPAÑOL V-CHIP SET UP CAPTION [OFF]

ADD/DELETE

AUTO MEMO STEREO [ON]

PREPARATION FOR USE

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the proce- dure below.

1)Connect the power cord to a standard AC outlet. Note: If some digits appear in the corner of the screen,

press the POWER button without unplugging the power cord.

2)Press the POWER button to turn on the TV.

3)Press the MENU button so that the menu display appears on the TV screen.

4)Press the CH(annel) ▲ or ▼ button to point to "[ENGLISH]".

5)Select "ENGLISH" or "ESPAÑOL" = Spanish by using the VOL(ume) ▲ or ▼ button.

6)Press the MENU button to exit the menu.

PICTURE CHANNEL SET [ENGLISH] ESPAÑOL V-CHIP SET UP CAPTION [OFF]

PICTURE CHANNEL SET [ENGLISH] ESPAÑOL V-CHIP SET UP CAPTION [OFF]

[ADD/DELETE FUNCTION]

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then press the VOL(ume) ▲ button.

3)Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.

4)Use the CH(annel) ▲ or ▼ button to select the channel you wish to put into memory or to erase from memory.

Note: The menu will disappear automatically in about 10 seconds. Perform "ADD/DELETE" function while this display appears on the

screen.

●Press the VOL(ume) ▲ or ▼ button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.

●Press the VOL(ume) ▲ or ▼ button to light up the channel number

in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

PICTURE CHANNEL SET [ENGLISH] ESPAÑOL V-CHIP SET UP CAPTION [OFF]

ADD/DELETE

AUTO MEMO

STEREO [ON]

CHANNEL PRESETTING

NOTE:You MUST PRESET channels BEFORE using CHANNEL ▲ or ▼ button. To preset a channel or to change a preset channel, follow the procedure below.

STEREO SOUND SYSTEM

1) Press the POWER button to turn on the TV.

2) Press the MENU button so that the menu display appears on the TV screen.

3) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then press the VOL(ume) ▲ button.

4) Press the CH(annel) ▲ or ▼ button to point to "AUTO MEMO". Then press the VOL(ume) ▲ button.

The tuner scans and memorizes all active channels in your area.

●The TV distinguishes between standard TV channels and cable (CATV) channels.

●When AUTO MEMO action is completed, the lowest memorized channel reappears on the screen.

●When you press the CH(annel) ▲ or ▼ button after selecting AUTO MEMO, the tuner will stop at the memorized channels only.

●The TV may memorize TV channels to be CATV channels if the reception conditions are poor. If this happens, try the AUTO MEMO action again when reception conditions are better.

This function suppresses noise, restores the dynamic range and electronically expands the stereo signal to create a more spacious sound effect.

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then press the VOL(ume) ▲ button.

3)Press the CH(annel) ▲ or ▼ button so that "STEREO" is selected.

4)Press the VOL(ume) ▲ or ▼ button to select the stereo mode on or off. Stereo sound is effective when "STEREO" is on.

ADD/DELETE

AUTO MEMO

STEREO [OFF]

PICTURE CHANNEL SET [ENGLISH] ESPAÑOL V-CHIP SET UP CAPTION [OFF]

PICTURE CHANNEL SET [ENGLISH] ESPAÑOL V-CHIP SET UP CAPTION [OFF]

ADD/DELETE

AUTO MEMO

STEREO [ON]

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical- ly when the power resumes.

OPERATIONS

WATCHING A TV PROGRAM PICTURE ADJUSTMENT

1)Press the POWER button to turn on the TV.

2)Select the desired channel with the CH(annel) ▲ or ▼ button.

3)Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.

4)Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the VOL(ume) ▲ button so that "PICTURE" is selected.

3)Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the VOL(ume) ▲ or ▼ button.

SETTING THE SLEEP TIMER

The sleep timer function allows you to have the power automatically turn off after a set time period.

1)Press the POWER button to turn on the TV and press the SLEEP button on the remote control .

2) You may change the sleep time by pressing the SLEEP button	SLEEP 10
on the remote control repeatedly. The timer can be set up to 90
minutes. 10 minutes each time the SLEEP button is pressed.	To cancel the sleep timer:
(The timer display counts up and sleep timer will be displayed	Press the SLEEP button
on the screen when you press the SLEEP button on remote	repeatedly until "SLEEP 0"
control.)	is displayed.

Note: When you disconnect the unit from the AC outlet or when you have a power failure, the sleep time will be lost.

GAME MODE

Set to the most suitable position for video games.

[+]: ON [ - ] : OFF

BRIGHT

Adjust until the darkest parts of the picture are as bright as you prefer.

[+] : increase brightness [-] : decrease brightness

CONTRAST

Adjust to increase or decrease contrast.

[+] : increase contrast	[-] : decrease contrast
COLOR
Adjust to be brilliant or pale color.
[+] : be brilliant color	[ - ] : be pale color
TINT
Adjust to obtain natural skin tones.

●In the above steps, the picture adjustment display will disappear from the TV screen automatically after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume) ▲ button so that "PIC- TURE" is selected. Then, press the CH(annel) ▲ or ▼ button repeatedly until the display returns to the screen.

●If you adjust another picture control after you set Game mode to [ON], Game mode is set to [OFF] automatically.

[USING THE GAME BUTTON]

You may also set Game mode and external input mode at the same time by pressing the GAME button on the remote control. “GAME” appears on the TV screen.

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV pro- grams, movies, news and prerecorded tapes, etc. with either a dialogue caption or text dis- play added to the program.

: Press the VOL(ume) ▲ or ▼ button.

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the CH(annel) ▲ or ▼ button to point to "CAPTION".

3)Press the VOL(ume) ▲ or ▼ button to select the mode you wish.

4)When done, press the MENU button to exit the menu.

[+] : greenish tone [ - ] : reddish tone

SHARPNESS

Adjust to detail in the picture.

[+]:increase sharpness [-]:decrease sharpness

Notes:

●“+” is achieved by pressing the VOL(ume)

▲button and “-” by pressing the VOL(ume) ▼ button.

●To exit Game mode and external input mode, press the GAME button on the remote control again.

●To cancel Game mode only, adjust the picture control. In this case, “VIDEO” instead of “GAME” appears on the TV screen.

●If you press the GAME button when the TV is off, the TV turns on and will be in Game mode and external input mode automatically.

: Press the CH(annel) ▲ or ▼ button.

PICTURE	PICTURE	PICTURE	PICTURE	PICTURE
CHANNEL SET	CHANNEL SET	CHANNEL SET	CHANNEL SET	CHANNEL SET
[ENGLISH] ESPAÑOL	[ENGLISH] ESPAÑOL	[ENGLISH] ESPAÑOL	[ENGLISH] ESPAÑOL	[ENGLISH] ESPAÑOL
V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP
CAPTION [OFF]	CAPTION [ C1]	CAPTION [ C2]	CAPTION [ T1]	CAPTION [ T2]

[-]

GAME MODE [+]

[-]

BRIGHT

[+]

[-]CONTRAST [+]

[-]

COLOR

[+]

[-]

TINT

[+]

[-]SHARPNESS [+]

OFF

ON