Alarm Timer
The K1 AV features an integral timer module (Timer),
which can be used to switch on the Tuner source at a
programmable time (Radio alarm clock)..

Programming the Timer

To program the Timer first select the TUNER as listening
source. You now have to set up the K1 AV in the way in
which you wish it to wake you (radio station, alarm
volume, loudspeakers A or B). When the Timer is
programmed, the K1 AV will use the current settings for
its alarm.
To set the alarm time press the button on the
front panel. The screen now displays the current set
alarm time, e.g. ‘14-38 TIM’; the word ‘TIM’ (TIMER)
flashes.
Now you can set the alarm time using the VOLUME +/-
buttons on the front panel. Holding the buttons pressed in
increases the rate of change.
When the desired time is shown on the screen, hold the
button pressed in for about one second. The screen
briefly shows the alarm time and ‘SET’ (instead of ‘TIM’),
e.g. ‘14-38 SET’. The alarm timer is now switched on and
active. The symbol glows constantly on the screen to
indicate that the alarm timer is active.
You can now switch the K1 AV off. As long as the
symbol is lit on the screen, the K1 AV