TM

Quick Guide

Using TS 100 Phones with TalkSwitch

How Do I ...

Press ...

Put a caller on hold?

hold /

flash

The caller hears music-on-hold* and is waiting for you to either transfer the call, or pick it back up.

* If Music-on-Hold enabled and a source is connected to the MUSIC jack.

Where is my

hold /

Button?

 

flash

 

Your hold / flash button is at the top of the vertical row of grey buttons on the right side of your TS 100 telephone.

Take a caller off hold?

Flash

hold /

 

flash

You are now re-connected with the caller.

Transfer a caller?

transfer

 

Example transfer 1 1 4 transfers the call to extension 114.

You then have two choices …

 

1. Wait for the extension to pick up or

Extension Number

x x x

Transferring

Local Extensions

 

111-118

Remote Extensions

 

211-218

Ring Groups

 

300-309

Voicemail

*

111-118

 

*

211-218

 

 

410-419

i)Once the extension picks up the phone you may talk to them while the caller is still on hold.

ii)If they want to speak to the caller, you hang up your extension, and the caller is immediately connected to the other extension or,

iii)If they do not want to speak to the caller, or the line was busy, you will

need to cancel the transfer by pressing

cancel . Now you are

reconnected to the caller.

 

2. Hang up your extension immediately

The call is transferred to the office extension immediately upon hanging up the phone.

Under some situations the call may bounce back to you. In this case, you will hear a stutter ring followed by a long pause. Simply pick up the phone and you are re-connected to the caller.

Transfer a caller to Voicemail?

 

Extension Number

transfer

* x

x

x

 

 

 

Example Flash * 2 1 4 transfers to voicemail to extension 214

 

 

Hang up the phone to complete the transfer.

 

 

 

 

Cancel a Transfer?

cancel

5

 

 

 

 

 

 

You are now connected with the caller, and any transfer you attempted has been aborted.

 

 

500 - 509

Park a caller?

hold /

* 5 x x

flash

You will then hear the attendant say "call parked at 5xx" or "that spot is unavailable". Available spots (park orbits) are 500 to 509.

Park a caller using Auto Park?

hold /

* 5 1 0

flash

The call will be parked at the next available spot (park orbit). You will hear the attendant say “call parked at 5xx”.

 

500 - 509

Retrieve a parked Call?

* * 5 x x

Pick up any extension and press * *

5 x x to retrieve the call parked in

spot 500 to 509. If you have ‘direct line access’ enabled press Flash * * 5 x x

 

*

 

Call Park Orbits

*

500-509

Auto Call Park

*

510

Example :

An inbound call tries two different extensions then is transferred to voicemail.

1.A caller asks for technical support,

2.You put the caller on hold, hold / flash

3. Then dial Mary's number 1 1 4

4.You get no answer, so you cancel

the transfer cancel (you are now re-connected with the caller.)

5.You try Mary's Cell Phone

transfer 2 1 4

6.Mary picks up the phone and says she is too busy to take the call.

7. You cancel the transfer cancel

8.You then offer the caller a chance to leave a message on Mary's voicemail. The caller says 'yes' so you transfer the call to Mary's

voicemail

transfer

* 1 1 4

9.If Mary has remote message notification activated she will get a call from the TalkSwitch unit informing her that a new voicemail message was left.

copyright Centrepoint Technologies Inc. 2005 document #: CT.TS005.528.EN - 01 (June 2005)

www.talkswitch.com

Page 1
Image 1
Talkswitch TS 100 manual Put a caller on hold?, Take a caller off hold?, Park a caller?, Park a caller using Auto Park?