TRIPOD SOCKET (Continued)
*Removing the tripod socket
1.Turn the tripod socket fixing screw in the counterclockwise direction and line up the white mark on the top of the knob with the tripod mount mark.
2.Pull the tripod socket fixing screw outward to open the tripod mount ring and then remove the tripod socket.
*Attaching the tripod socket
1.Open the tripod mount ring and set it to the lens.
2.Make sure that the white mark on the top of the tripod socket fixing screw and the tripod mount mark are aligned, and then pull the knob outward.
3.Close the tripod mount ring, and tighten the tripod socket fixing screw in a clockwise direction.
*Hold the camera firmly when removing the tripod socket so you do not drop the camera or the lens.
*Make sure that the white mark on the top of the knob and the indicator on the tripod socket are aligned before you pull on the tripod fixing screw.
DEPTH OF FIELD
With a camera equipped with a depth of field preview button or a aperture stop down mechanism, the depth of field can be directly observed through the viewfinder screen of your camera.
**The optical design for this lens takes into consideration the various features of digital single reflex cameras. However, due to the configuration of the digital single reflex cameras, even when the autofocus accuracy is within specifications, the focal point may be a little forward or behind the optimum point when shooting with autofocus under some conditions.
PRECAUTIONS IN SHOOTING
*The Tamron lens, SP
