PROFESSIONAL CUTTING HEADS
5” SEMI-AUTOMATIC CUTTING HEAD
ITEM NUMBER: 746451
Owner’s Manual
(#27976 - Page 2)
Cutting Head Assembly | Troubleshooting |
Place the spool into the inner housing. Pass both line ends through the eyelets and remove the lines from the locking slots of spool as shown in Ref. 10. Place the return spring into the spool, then place the outer housing on the inner housing and assemble firmly by pushing the two locking slots with thumbs as shown in Ref. 11. Adjust nylon line to desired length by pushing in on the tap button and turning the spool.
Problem: Nylon line is not feeding.
Possible Causes:1.) Nylon line is almost used up.
2.) The lines have been deformed .
3.) The lines have become intertwined.
Solutions:1.) Disassemble the cutting head.
2.) Remove nylon line from the spool and rewind.
3.) Replace the nylon line if the line is almost gone or deformed.
4.) Reassemble the cutting head.
Ref. 10
Ref. 11
Parts List
Ref | Part Number | Part Description | Qty |
1 | Adapter, 8mm x 1.25mm LH Male | 1 | |
|
|
|
|
2 | Adapter, 10mm x 1.25mm LH Female | 1 | |
|
|
|
|
3 | Body, Nylon Cord | 1 | |
|
|
|
|
4 | Nut, Special | 1 | |
|
|
|
|
5 | Spring, Reel | 1 | |
|
|
|
|
6 | Reel, Nylon Cord | 1 | |
|
|
|
|
7 | Cap, Body | 1 | |
|
|
|
|
8 | Eyelet | 2 | |
|
|
|
|
FULLY AUTOMATIC
HEAVY-DUTY COMMERCIAL
| The Original | The BRAIN® |
| BRAIN® | 2000 |
Order # 746251 | Order # 746751 |
Std. Line Diameter: .095” | Std. Line Diameter: .095” |
Line Capacity: 30ft. / 9.1m | Line Capacity: 20 ft./ 6.7m |
Line
Order # 746280
Std. Line Diameter: .130”
Line Capacity: N/A
Feed
Order # 746290
Std. Line Diameter: .105”
Line Capacity: 15ft / 4.5m
Order # 746551
Std. Line Diameter: .095”
Line Capacity: 25ft / 7.6 m
ISM, Inc. • 1028 4th St. SW • Auburn, WA 98001 • Phone: (253)
