TECHNICAL |
|
|
| BULLETIN NUMBER PI 3126 |
SERVICE |
|
Date: | December 2004 |
Model & Serial: |
|
| A211451 and later |
Reason: | We have received field reports that some units may not idle properly or may not |
| be adjustable to an acceptable idle RPM. In this situation the likely cause of this |
| is the length of the throttle cable. A longer throttle cable, which allows for more |
| idle speed adjustment is listed below and will correct this condition. In addition a |
| swivel cap is included to assist with the retention of the new longer throttle wire. |
Comments: | The new throttle wire inner length changes from the current 87.5mm to 91mm in |
| the new wire. After connecting the throttle wire to the carburetor swivel install |
| the swivel cap as shown in Fig. |
| be necessary to check and adjust the idle RPM. |
Part Number Changes:
Old Part # | New Part # |
| |
N/A | |
N/A |
Description
Throttle wire complete Swivel cap (#2) Throttle wire set
Nikko Tanaka Engineering U.S.A. ,Ltd.• 1028 4th Street SW, Bldg B • Auburn, WA 98001 • Phone: (253)