TANDBERG MPS800 user manual MPS 800 Gateway Kit Installation

MPS 800 Gateway Kit Installation

1

Use the rear panel power switch to switch off the MPS power.

3

Connect a LAN cable from the Ethernet socket of the board just installed and to your network.

5

The system is ready for configuration once the Power and the Active LED are green and the initial configuration menu appears on the LCD.

MPS Serial No. Label

2

Insert the new Gateway board

into the first available slot in the front panel.

4

Turn the MPS power back on.

6 Send the MPS serial No. to your TANDBERG Representative. You will then receive the option key needed to activate the new boards.

Access the TANDBERG MPS by entering the IP-address of the Gateway Board in a standard web browser to complete the configuration of the new Gateway Board and upload the new Gateway option keys. See the below Fig. and the MPS User Manual for more information.

7 Click the Restart button.

D13903.02