GB
GB
Remarks

Using the Bracket for Wall Installation

The display box can be used with the attached bracket for wall installation.
The display box can also be used horizontally(eg on tables).
*Please note: If you measure yourself while holding the display box in your hand, this weight(about 500 g) will be added
to your body weight.
Deciding on the position of the bracket for wall installation
Ensure the bracket is no higher than 1.7 m from the floor.
Do not use the equipment if the connection cable is tightly stretched or
part of the platform is unsupported, as this may cause malfunction.
Attaching the bracket for wall installation
Firmly screw the bracket to the wall by inserting the screws (x 2)
through the holes in the bracket using a cross head screwdriver.
Attaching the display box
Hang the battery box cover on the back of the display box, insert the
hooks of the large bracket into the holes on the bottom to attach the
display box.
Always use the attached screws to attach the bracket for wall
installation
If you attach the bracket with double-sided sticking tape, for example, it may fall down.
Ensure that the display box is firmly hooked on the bracket for wall
installation
If the display box is not hung on both hooks, it may fall down or become unstable.
Preparation
Use
7
GB
GB
Instruction Manual (This Manual)Operating ChartWarrantyBracket for Wall InstallationParts/AccessoriesDry Cell Batteries (AA x 4)(R6P)Screw (x 2)Carpet Feet (x 4)
Connection Cable
Heel Electrode
Front
Electrode
Display Box
Scale Platform
Scale Platform
Underside
6
Personal Memory Key (5 users)
Battery Box Cover
(on the Bottom)
Weight Only / OFF Button
LCD Display
GRAPH Button
Time / DOWN
Button
UP Button
SET Button

Check the Accessories!

Remove when you need to use them.
Holes for Carpet Feet (Four in Total)
BF-562海外GB+D面付解除 ページ7