TANITA TBF-604 BODY FAT MONITOR/SCALE

Preparations before use:

Open as shown

Direction of the batteries

Inserting the batteries

1.Locate the battery cover on the back of the monitor platform. Press the tab to release the cover as shown.

2.Insert the supplied AA-size batteries as indicated.

NOTE: Be sure that the polarity of the batteries is set properly. If the batteries are incorrectly positioned the fluid may leak and damage floors. If you do not intend to

use this unit for a long period of time, it is advisable to remove the batteries before storage.

Positioning the monitor

Place the monitor on a hard, flat surface where there is minimal vibration to ensure safe and accurate measurement.

NOTE: To avoid possible injury, do not step on the edge of the platform.

Attaching the support feet (carpet use only)

Insert the support feet into the holes at the four corners on the bottom of the measuring platform.

NOTE: Do not use the monitor on any carpeting that is more than 0.8 inch in thickness.

Do not use the support feet on hard, flat surfaces, as the unit may tip over.

Handling tips

This monitor is a precision instrument utilizing state-of-the-art technology. To keep the unit in the best condition, follow these instructions carefully:

•Do not attempt to disassemble the measuring platform.

•Store the unit horizontally, and place it so that the PERSONAL key will not be pressed accidentally.

•Avoid excessive impact or vibration to the unit.

•Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme temperature change.

•Never submerge in water. To clean, use a dampened cloth and mild detergent. Use alcohol to clean the electrodes.

•When you change the batteries, exchange all four batteries at the same time with new AA-size batteries.

If you need assistance, please call our toll-free customer service number at 1-800-TANITA-8.

6