TANITA TBF-611 BODY FAT MONITOR/SCALE

Turn the unit on.

Pre-set data will appear.

Wait for “0.0 lb” to appear.

Weight will appear first.

Display counts down from 5 to 1.

Body fat percentage will appear.

Data will be repeated 3 times, then the power will

automatically turn off.

The batteries run low.

Taking measurements

1. Turn on the power

Using your toe, turn the unit on by tapping the Personal key located on the lower right- hand corner of the platform.

Your pre-set data will appear (gender and height).

Immediately after your pre-set data, the display will show “0.0”.

2. Take measurement

Wait for “0.0” to appear before stepping onto the measuring platform.

Note: If you step on before “0.0”, you will not receive a reading.

Be sure you are barefoot, and that the soles of your feet are clean and dry.

Be sure that your toes and heels are correctly aligned on the measuring platform. Stand erect on the platform.

Note: If you do not step onto the measuring platform within about 20 seconds after “0.0” appears, the power shuts off automatically.

Your weight will be shown first. The numbers 5, 4, 3, 2, 1 will appear one after another in the display. The numbers will disappear, and your body fat percentage will be displayed.

Continue to stand erect on the platform. The values of body fat percentage and body weight will be displayed alternately at 2-second intervals. If you remain on the platform, the display will continue for about 30 seconds, and then the power will automatically turn off.

If you step off the platform, the alternating display of body fat percentage and body weight will be repeated 3 times, and then the power will automatically turn off.

Multiple users

The unit may be used by more than one person. Simply repeat the programming process. (Steps 1 through 3 of Setting and storing data in memory.)

Note: Previously stored data will be erased.

Replacing the batteries

When the batteries run low, the “Lo” message will appear on the display window. When this message appears, be sure to replace the batteries immediately, since weak batteries will affect the accuracy of your measurements.

Your setting will not be erased from the memory when you remove the batteries.

New batteries will last for about one year if the unit is used once every day. The unit comes with trial batteries; their service life will be short.

8