Troubleshooting

If the following problems occur...

•“st-lb” or “kg” appears while taking a weight measurement.

•Nothing appears in the display screen after initial display.

•Nothing appears when the Personal key is pressed, or

the display shows “- - - - -” and goes off when the Personal key is pressed.

•The body fat percentage measurement does not appear after the weight

is measured.

•The body fat percentage measurement is extremely low/extremely high.

Then...

The unit’s “Weight Mode” has been set to measure your weight in units of stone- pounds or kilograms. Refer to the Selecting the Weight Mode (lb, kg, or st-lb)on p.5 if you would like to change the setting back to pounds (lb).

Check foot alignment. Make sure you wait for “0.0” to appear before stepping on the platform. Check to see that the batteries are fresh and are in the correct positions.

No data (gender or height) has been stored in the memory.

Vibration will interfere with measurement of the fat percentage. Be sure to stand erect and still on the measuring platform. Do not bend your knees. Be sure that shoes and socks are removed and check foot alignment. Step off and repeat steps on p.8.

Be sure you are measuring in the correct user mode (male or female), and that the soles of your feet are clean and properly aligned with the guides on the measuring platform. Dehydration, exercise, foot calluses, etc. can interfere with measurement of the fat percentage. Step off and repeat steps on p.8.

Specifications

TBF-612

Weight Capacity

300 lb (136 kg) (21 st-6 lb)

Weight Increments 0.5 lb (0.2 kg) (0.5 lb)

Fat Percentage 1%

Power Supply

DC 6V AA-size (UM3-type) battery (x4)—included

Power Consumption

60 mA maximum

Measuring Current 50 kHz 500 µA

UPC No

TBF-612-DG (Dark Grey) 742496-166210

After sales service

Please contact the store at which you bought this monitor for any inquiry regarding operation or trouble, request for repair and/or placement of an order for parts or products. Or call 1-800-TANITA-8 (USA and Canada only).

9