Tanita WB-300 instruction manual General Troubleshooting, Weight Capacity ‘E’

8. General Troubleshooting

Weight Capacity: ‘E’

If the weight is less than 10 lbs, the Weight LCD will display the weight, however, the reading will not lock in. Auto-on function will not work if the weight is less than 30 lbs.

If the weight exceeds the scale’s maximum weighing capacity, the display panel will register ‘E’ and the scale will shut off in 2 seconds.

Weight LCD

Low Battery Warning: ‘LOWBATT’ / ‘LoAA,’ ‘nobAt,’ ‘Ad Er,’ ‘Lo L’

The scale is operated by three replaceable AA alkaline batteries. If the AA batteries are low, ‘LOWBATT’ icon will flash on the Weight LCD, and ‘LoAA’ will flash on the Clock LCD alternating with clock for two seconds. Please replace with three new AA alkaline batteries immediately. Please refer to Inserting Batteries for instructions. If you see ‘Ad Er’ or ‘nobAt’ on the weight LCD, make sure the batteries are properly installed and have contact with the battery chamber.

The clock on this scale is operated by one replaceable 3-volt CR123 Lithium battery. If the lithium battery is low, ‘LOWBATT’ icon will flash on the Weight LCD, and ‘Lo L’ will be displayed on the Clock LCD alternating with clock for 2 seconds. This will continue until the lithium battery runs out, showing the Clock LCD panel blank. Please replace with one new lithium battery immediately. Please refer to Inserting Batteries for instructions.

Clock LCD

The Lithium Battery is low.

Clock LCD

The AA Batteries are low.

12