Di8DC
TECHNICAL SPECIFICATIONS
|
|
|
|
|
System | Di8DC /Di8DCt |
|
|
|
Frequency Response | 65Hz - 30kHz |
|
| |
Frequency Range | 53Hz - 35kHz |
| ||
System Sensitivity (1W @1m) (2) | 91dB (1W = 2.83V for 8 Ohms) |
| ||
Dispersion | 90 degrees conical |
| ||
Driver Complement | 1x 200mm(8.00")DualConcentricTM | |||
Low Frequency | ||||
| constant directivity driver with | |||
High Frequency | multi fibre paper pulp cone | |||
25mm (1.00") titanium dome with | ||||
Crossover | neodymium magnet system | |||
1.5kHz - 2nd order LF, |
| |||
| 2nd order HF | |||
Directivity Factor (Q) | (with dynamic HF protection) | |||
5.5 averaged 1kHz to 10kHz |
| |||
Directivity Index (DI) | 7 averaged 1kHz to 10kHz |
| ||
Rated Maximum SPL (2) | 111dB | |||
Average | ||||
Peak | 117dB | |||
Power Handling | 90W | |||
Average | ||||
Programme | 180W | |||
Peak | 360W | |||
Recommended Amplifier Power 180W @ 8 Ohms |
| |||
Nominal Impedance | 8 Ohms |
| ||
Di8 DCt - Transformer Taps (bottom rotary switch) |
| |||
70V | 60W / 30W / 15W / 7.5W / OFF & | |||
100V | Low Impedance operation | |||
60W / 30W / 15W / OFF & | ||||
| Low Impedance operation | |||
|
|
|
|
|
|
|
|
|
| Construction |
|
|
|
| Enclosure | High Impact Polystyrene (HIPS) |
| |||
| Grille | rated IP64 to EN60529 (IEC529) |
| |||
| Steel, with weather resistant coating |
| ||||
| Finish | Textured Black or White paint |
| |||
|
|
|
| (custom trim colours can be supplied |
| |
| Connectors | to special order - minimum order quantity applies) |
| |||
| Euroblock type removable locking connector |
| ||||
| Fittings | with screw terminals with "loop through" facility |
| |||
| 1 x |
| ||||
| Supplied | 2 x M8 yoke bracket inserts |
| |||
| Yoke bracket |
| ||||
| Accessories |
|
|
| ||
| Optional | Pole mount adaptor, multi angle |
| |||
| Accessories |
| ||||
| Dimensions | 404.3 x 260 x 260.3mm (H x W x D) |
| |||
| NET Weight | (15.92 x 10.24 x 10.25”)(H x W x D) |
| |||
| 7.0kg (15.87lbs) |
| ||||
Notes:
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber A full range of measurements, performance data, CLF and Ease™ Data can be downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs, California can also be obtained from the downloads section of www.tannoy.com Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications.
Distortion | 2nd Harmonic | 3rd Harmonic |
10% Full Power (8.5V) | ||
250Hz | 1.55% | 0.42% |
1kHz | 0.41% | 0.63% |
10kHz | 1.2% | 0.65% |
1% Full Power (2.7V) | 2nd Harmonic | 3rd Harmonic |
250Hz | 0.43% | 0.48% |
1kHz | 0.07% | 0.47% |
10kHz | 0.55% | 0.13% |
Ordering Information
PART NUMBER | MODEL NAME | COLOUR | PACKED QUANTITY | PACKED WEIGHT |
8001 4120 | Di8 DC | Black | 2 | 8.25kg (18.19lbs) |
8001 4121 | Di8 DC | White | 2 | 8.25kg (18.19lbs) |
8001 4130 | Di8 DCt | Black | 2 | 9.50kg (20.94lbs) |
8001 4131 | Di8 DCt | White | 2 | 9.50kg (20.94lbs) |
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T:00 44 (0) 1236 420199
T:00 1 (519) 745 1158
T:00 49 (180) 1111 881
T:00 33 (0)1 7036 7473
E:enquiries@tannoy.com
E:inquiries@tannoyna.com
E:anfragen@tannoy.com
E:ventes@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change | Di8 DC data file // issue 1.06 // 15.01.08 |
