6.0 SERVICING

6.1 Cabinet finish

To remove marks and scuffs use a soft brush. If necessary, a little warm water and detergent can be used but under no circumstances use a solvent or abrasive cleaner.

6.2 Driver removal

Lay the cabinet on its back. Remove the six hexagonal screws and set aside. Ease the driver from the front of the cabinet taking care not to mark the front surface. Remove the driver, note the polarity of the internal connections and disconnect the internal wiring. Take care not to damage the moving parts of the LF driver. To refit the driver, connect the cables from the crossover to the LF terminals. Fit the driver into the mounting hole, making sure that the internal connecting cables are not trapped or able to touch the LF cone. Fasten the screws finger tight and then progressively tighten them down with the appropriate Allen key.

Repeat the same procedure for the HF driver.

6.3 Crossover

The crossover is mounted on the rear of the terminal panel. To inspect it, remove the panel by releasing the hexagonal screws. Take care to avoid undue stress on the cables and components.

To remove the crossover completely the cables must be disconnected from the drive unit. Please proceed as above to remove the drive unit.

6.4 List of spare parts.

PART NUMBER

DESCRIPTION

 

 

9900 0354

Cabinet assembly - Reveal

7900 0495

Driver kit – LF – type 1690

7900 0457

HF unit – type1205

7300 0630

Crossover assembly & termination panel – type 1262

7.0 WARRANTY

No maintenance of the Reveal monitor is necessary.

All components are guaranteed for a period of five years from the date of manufacture, subject to the absence of, or evidence of, misuse, overload or accidental damage.

For further information please contact your dealer or the distributor in your country. If you cannot locate your distributor please contact:

Customer Services

Tannoy Ltd

Coatbridge, Strathclyde

ML5 4TF

Telephone

01236 420199 (UK)

+44 1236 420199 (International)

Fax

01236 428230 (UK)

+44 1236 428230 (International)

Internet:

http://www.tannoy.com

 

DO NOT SHIP ANY PRODUCT TO TANNOY WITHOUT PREVIOUS AUTHORISATION.

This warranty in no way affects your statutory rights.

Page 15
Image 15
Tannoy Reveal user manual Cabinet finish, Part Number Description

Reveal specifications

Tannoy Reveal is a highly regarded series of studio monitor speakers designed for professional and home studio environments. These monitors are known for their accurate sound reproduction and exceptional build quality, making them a popular choice among audio engineers, music producers, and enthusiasts alike.

One of the main features of the Tannoy Reveal monitors is their innovative Dual Concentric driver technology. This unique design integrates the woofer and tweeter into a single point source, allowing for coherent sound reproduction across the entire frequency range. As a result, audio professionals can enjoy improved imaging and spatial clarity, making it easier to pinpoint sounds within a mix.

The Reveal series comes with a wide frequency response, ensuring that both low and high frequencies are rendered with precision. The bass response is deep and impactful, ideal for genres that require a solid low-end. The high frequencies are airy and detailed, catering to the nuances of vocals and various instruments. With well-balanced sound characteristics, the Reveal monitors provide a true representation of audio, making them invaluable for mixing and mastering tasks.

Tannoy has incorporated rear-firing bass ports in the Reveal models, allowing for improved efficiency and reduced distortion. This design feature enhances the overall acoustic performance, enabling the monitors to deliver a more robust low-end without compromising clarity. Additionally, the monitors are equipped with room EQ controls, allowing users to tailor the sound output based on their specific listening environment.

The build quality of the Tannoy Reveal is also noteworthy. Constructed with durable materials, these monitors are designed to withstand the rigors of professional use. The sleek, modern design fits seamlessly into any studio setup while also minimizing resonance and interference.

Connectivity options are versatile, with each monitor featuring balanced XLR and TRS inputs, making it easy to integrate them with various audio interfaces and mixers. Each monitor is designed to provide a reliable performance, ensuring that audio professionals can depend on them for critical listening tasks.

In summary, the Tannoy Reveal monitors deliver a combination of advanced technology, superb sound quality, and professional-grade construction. Whether used in a commercial studio or a personal setup, they offer exceptional audio performance that meets the demands of today's music production landscape. With features designed to enhance accuracy and clarity, the Reveal series continues to be a top choice for audio professionals worldwide.