To open code memo for the first time

1From standby select Menu > Organizer > Code Memo.

2Follow the instructions on the screen and select Continue.

3Enter a passcode and select Continue.

4 Confirm the passcode and select Continue.

5 Enter a checkword and select Done.

To add a code

1From standby select Menu > Organizer > Code Memo.

2Enter a passcode and select New Code > Add.

3Enter a name associated with the code and select Continue.

4Enter the code and select Done.

To change a passcode

1From standby select Menu > Organizer > Code Memo.

2Enter your passcode and select More > Change Passcode.

3Enter your new passcode and select Continue.

4Re-enter the new passcode and select Continue.

5Enter a checkword and select Done.

Forget your passcode?

If you forget your passcode, you must reset the code memo. This means that all entries in the code memo are deleted. The next time you enter the code memo, you must proceed as if you are opening it for the first time. See To open code memo for the first time on page 57.

To reset code memo

1From standby select Menu > Organizer > Code Memo.

2Enter any passcode to access the code memo. The checkword and codes that are then shown are incorrect.

3Select More > Reset.

4Reset code memo? appears.

5 Select Yes.

Profiles

Profiles automatically adapt your phone to different situations, for example, while in a meeting or when driving. Some profiles settings, for example, ring volume may be adjusted automatically to suit a certain area or accessory. You can reset all profile settings to how they were set when you bought your phone.

More Features 57

This is the Internet version of the User's guide. © Print only for private use.