112RmkII Technical Documentation
ARCHITECT'S SPECIFICATIONS
The cassette player/recorder shall utilize a reversible transport mechanism. Separate record and reproduce heads shall be used allowing monitoring off tape.
Inputs and outputs shall be provided on unbalanced RCA connectors on the rear panel. The option of balanced XLR connectors shall be provided by the optional
Monitor selection switch shall be provided on the front panel for selection between input monitor mode and automatic monitor mode. Dolby™ B and C noise reduction shall be implemented and switched from the front panel. An MPX filter shall be switchable from the front panel.
A pitch control will provide approximately ±12% range of pitch control, with a dedicated on/off control.
The cassette deck shall have dedicated buttons to access the RTZ function (Return to Zero) and two locate points. An additional separate button shall trigger the repeat function which will loop between locate 1 and locate 2.
A digital counter shall be used to display precise tape location.
For extended cascade play or recording functions, the cassette deck shall offer sequential triggers through the parallel control allowing hands free continuous operation.
A parallel control shall be provided which can be used for remote control and tallies, and it shall be compatible with the TASCAM
The cassette deck shall mount in a standard 19" rack mount form, taking three rack spaces. The cassette mechanism shall have dimensions of 19" x 5 1/4" x 14" (W x H x D).
Metric measurements : 482 x 132 x 356mm (W x H x D).
The unit shall be a TASCAM 112RmkII cassette deck.
NOTE: This text is available in a standard text file on TASCAM's Sound Contractor
OPTIONAL REMOTE (RC-112R) PARALLEL I/O
Pin | Signal |
1 | PLAY In |
2 | FFWD In |
3 | REW In |
4 | PAUSE In |
5 | STOP In |
6 | REC In |
7 | CASCADE START In |
8 | NOT USED |
9 | TAPE DIRECTION Tally |
10 | END OF TAPE Tally |
11 | FF Tally |
12 | REW Tally |
13 | PAUSE Tally |
14 | STOP Tally |
15 | REC Tally |
16 | NOT USED |
17 | REVERSE PLAY In |
18 | REVERSE PLAY Tally |
19 | REEL PULSE |
20 | NOT USED |
21 | RTZ In |
22 | FADER START In |
23 | NOT USED |
24 | GROUND |
25 | +5V (Max 50mA) |
Control I/O Legend
|
| 12 |
| 10 | 8 |
| 6 |
| 4 |
| 2 |
| ||||||||||||
13 |
|
| 11 |
|
| 9 |
|
| 7 |
|
| 5 |
|
| 3 |
|
| 1 | ||||||
|
|
|
|
|
| |||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
25 |
|
| 23 |
|
| 21 |
|
| 19 |
|
| 17 |
|
| 15 |
|
| ||||||
|
| 20 |
|
|
| ||||||||||||||||||
24 |
|
| 22 |
| 18 | 16 | 14 | ||||||||||||||||
Parallel Control Notes:
All command controls are labeled as "in" on the chart at left. The commands are active when brought to ground for more than 50 milliseconds or longer.
FADER START pin (22) operates as a latched function. Playback begins when the pin is brought to ground for more than 50 msec, and stops when the ground is released for more than 50 msec.
Tally outputs indicates the corresponding transport function when the pin is brought to ground.
7733 Telegraph Road • Montebello, CA 90640 • (323) | Page 2 of 3 | |
All features and specifications are subject to change without notice. Contact your local TASCAM representative for the latest information. | 112RmkII_TECHDOC.pdf | |
041900 | ||
|
