8 – Other useful functions

Outputting external microphone signals from the speakers

You can connect external microphones to this unit and use it as an amplifier.

1 Press the INPUT key to open the INPUT screen.

CAUTION

•• When EXT > SP is set to ON, do not point external microphones toward the speakers. Doing so could cause feedback.

•• Turning up the FRONT MIC/EXT MIC and VOLUME knobs increases the probability of feedback. Please use care when adjusting these.

2Use the CURSOR [§/] keys to select the SOURCE item.

3Use the DATA wheel to select EXT/REAR or EXT/

LINE.

4Use the CURSOR [§/] keys to select the EXT > SP item.

5Use the DATA wheel to set it to ON, allowing the sounds input from the external microphones to be output through the speakers.

NOTE

•• This function is for outputting the sound input by external microphones. Sound input from the built-in microphones cannot be output through the speakers.

•• When using only one microphone, set MONO MIX to ON to output the sound through both the left and right speakers.

Copying CD tracks to an SD card (BB-1000CD only)

You can copy tracks from a CD to an SD card. The tracks from the CD are copied to the currently open folder on the SD card. To change the destination folder select the folder on the BROWSE screen in advance.

1Confirm that the unit is stopped.

2Press the HOME key to open the Home screen.

3Press the MENU key to open the MENU screen.

4Use the DATA wheel or CURSOR [§/] keys to select COPY, and press the ENTER key.

5Use the DATA wheel or CURSOR [§/] keys to select CD > SD, and press the ENTER key.

42 TASCAM BB-1000CD/BB-800