Tascam CD-D4000 MKII 7 - Compare CD-ROM

TASCAM CD-D4000 MKII

7 - Compare CD-ROM

This mode is used for comparing a CD-ROM which

has just been duplicated using the copy mode. It can-

not be used for audio CDs.

Press the

MODE

key until the display shows the

following:

Press

ENTER

Make sure that the original disc is in the

MASTER

drive disc tray, and the copy disc is in

the

SLAVE

drive disc tray.

Press

ENTER

As the comparison process proceeds, the per-

centage of the process which has been com-

pleted is shown on the display.

Note that the comparison process is carried out

quicker than recording or testing. The time

taken for comparison is independent of any

speed settings made (these only affect the

recording speed).

When the comparison has ﬁnished successfully,

the display shows:

The compare operation can be stopped at any

time by pressing and holding down the

MODE

key and pressing the

ENTER

key. An error

message will be displayed and you should use

the

MODE

key to return to the mode selection.

If there has been an error in the comparison (i.e.

the two CDs do not match) or if they do not

match in any other way (the wrong pair of discs

has been loaded), the compare operation will

stop at the point at which the mismatch was

detected, and the display will show:

7.1 Play audio track

Since it is impossible to make a bit-by-bit compari-

son of audio CDs, this function is provided for you to

“audition” a CD copy, using a pair of headphones

connected to the

MASTER

SLAVE

drive head-

phone jack.

Any standard headphones with a 3.5 mm stereo jack

may be used. The volume is adjusted using the

drive’s volume control (turn to the right to increase

the volume, and to the left to decrease the volume.

Press the

MODE

key until the display shows the

following:

Press

ENTER:

Use the

MODE

key to toggle between

Master

and

Slave

, with a third option

being to exit (

Exit

) the play audio mode.

Press the

ENTER

key to conﬁrm the selection:

After the

ENTER

key has been pressed, a

Please wait ...

message is

brieﬂy shown and track 1 will start playing.

Pressing

ENTER

again will jump to the next

track and start playback. If the last track is

reached in this mode, and the

ENTER

key is

pressed, playback will start at the ﬁrst track.

If the

MODE

key is pressed from the screen

above, the display changes:

Pressing the

ENTER

key will start playing the

track before the current track. If the ﬁrst track is

currently being played, and the

ENTER

key is

pressed, the last track will start playing.

Pressing the

MODE

key from the display shown

above will change the display again:

Mode select

3 Compare CD-ROM

Compare CD-ROM

Ready ?

Comparing  ø

Compare finished

Complete

Compare finished

Fail

Mode select

4 Play audio

Drive select

Master

Track 01 Play

1 Next track

Track 01 Play

2 Previous track

Track 01 Play

3 Exit