TASCAM CD-GT1 — 9

Using the menu system

ee the table on this page for details of
the dierent menus and their settings
o enter the menu system press the
LCD MENU
key until the menu you
want appears shown in a ashing re
versed box and the rst menu item is
shown on the main part of the screen
se the up or down keys 5 and
b to set the value of the rst menu
item
ote that you do not need to press
ENTER
to set the values e settings
change as soon as the key is pressed
ress
ENTER
to move to the next
menu item in the list
ress
MENU
to move to the next menu
and its rst menu item
xit the menu system using the
DISPLAY/ESC
key
NOTE
The TUNER menu requires you to press
ENTER
after the TUNER menu is shown on
screen (as the effect sound is cut when the
tuner is operational).
Menu Menu item Values Notes
EFFECT EFF ON/OFF
turns effect on or off
LIB 00 to 42 preset number
Parameter — depends on effect type
LVL
0 to 64 effect output level
PITCH
PIT
0 to –50% (pitch) or
0, –8, –16, –32 and
–50 (SSA)
sets pitch shift or slow speed
audition values
SSA
SSA ON/OFF Sets slow speed audition on or off
KEY KEY
O6 to I6 (or SSA) Sets pitch shift in semitones
FINE
–50 to +50 (or SSA) sets pitch shift in cents
MENU PLAY
ALL/SGL all or single play
CUE
CUE/FLS cue or “ash play” operation
FOOT
EFF/CUE sets footswitch mode: either step
through the effect slots, or cueing
TUNER AT/MT
E2 to E5 (when tuning)
MODE
AT/MT automatic or manual tuning
CAL
435 to 445 calibration in Hz