Tascam CD-VT1MKII owner manual Using built-in effects, Effect Library, Voice Change function

(continued from the previous page)

Tap the CD EFF/SETUP key to enter the CD Effect menu, and select SPLT by pressing either the PREV or NEXT key. Press the UP or DOWN key to select from the following:

C-M: outputs the sound of the CD from the left, and the sound of the microphone(s) from the right.

M-C: outputs the sound of the microphone(s) from the left, and the CD sound from the right.

OFF: outputs stereo mixed sound of CD and microphone(s) from left and right.

Using built-in effects

The effector of the CD-VT1MKII consists of an effect library and a voice change function.

Effect Library

There are 18 built-in preset effects. You can adjust the parameters for each of them.

Voice Change function

The Voice Change function allows you to raise or lower the pitch of the sound input from the microphone(s) by 1 octave.

Using the effector

1.Switch the EFFECT ON/OFF switch to ON.

2.Press the EFFECT key to open the Effect menu.

3.Select EFF using either the PREV or NEXT key.

4.Use either the UP or DOWN key to select the preset effect (01-18).

5.Select PAR by pressing either the PREV or NEXT key, then press ei- ther the UP or DOWN key to set the effect parameters (effect val- ues).

Using built-in effects

6.Press the TIME/ESC key to exit the Effect menu. The parameters you have selected are automati- cally stored.

Using the voice change

1.Switch the EFFECT ON/OFF switch to ON.

2.Press the V.CHANGE key to open the voice change menu.

3.Press either the UP or DOWN key to select from the following:

UP: raises the pitch of the sound from the microphone by 1 octave

OFF: the sound from the micro- phone is not affected

DN: lowers the pitch of the sound from the microphone by 1 octave

4.Press the TIME/ESC key to exit the voice change menu.

TASCAM CD-VT1MKII — 19