1–Introduction

Environmental considerations

Do not use any benzene, paint thinner, ethyl alcohol or other chemical agents to clean the unit as it could damage the surface. To clean the unit, wipe gently with a soft dry cloth.

Precautions for placement and use

The HD-R1 may be used in most areas, but to maintain top performance, and prolong operating life, observe the following notes, precautions and environmental conditions:

•Avoid exposing it to extremes of temperature and humidity and avoid mechanical shocks and vibration.

•Keep the unit away from strong magnetic fields

(TV sets, computer monitors, large electric motors, etc.).

•The nominal temperature should be between 5°C and 35°C (41°F and 95°F).

•Relative humidity should be 30 to 90 percent.

•As the unit may become hot during operation, always leave sufficient space above the unit for ventilation. Do not install this unit in a confined space such as a bookcase, and do not put anything on top of the unit.

•Avoid installing this unit on top of any heat- generating electrical device such as a power amplifier.

•Make sure that the unit is mounted in a level position for correct operation.

•The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician.

Beware of condensation

If the unit is moved from a cold to a warm place, or used after a sudden temperature change, there is a danger of condensation; vapor in the air could condense on the internal mechanism, making correct

operation impossible. To prevent this, or if this occurs, let the player sit for one or two hours at the new room temperature before using.

Precautions for handling CF cards and USB storage

Compact Flash (CF) cards and USB storage devices are manufactured with precision. In order to prevent damage to the card, card slot, USB device or USB port, please observe the following precautions when handling them.

•Do not keep them in extremely hot or cold environments.

•Do not keep them in extremely humid environments.

•Do not get them wet.

•Do not place things on top of them or twist them.

•Do not strike or shock them.

•Do not remove a CF card or USB storage device during recording, playback, data transfer or other kind of access.

Rack-mounting the unit

Use the supplied rack-mounting kit to mount the unit in a standard 19-inch rack, as shown below. Remove the feet of the unit before mounting.

NOTE

•Leave 1U of space above the unit for ventilation.

•Allow at least 10 cm (4 in) at the rear of the unit for ventilation.

6 TASCAM HD-R1