1–Introduction

About this manual

When we refer to a key or connector or control on the MP-BT1, the typeface looks like this: PLAY.

When we refer to items shown on the display, the typeface looks like this: MENU.

About the power supply

The MP-BT1 uses a built-in lithium ion battery that can be recharged by connecting the unit to a computer with the USB cable. You can also use an AC adapter (sold separately) to power the unit and recharge the battery.

NOTE

When you purchase the MP-BT1, the battery is not fully charged. Please charge it before use or use it with an AC adapter (sold separately).

•To charge the battery using a computer, connect the unit to the computer using the

included USB cable and turn the computer on if it is off.

Please see “2-Preparing tracks” for instructions about disconnecting the USB cable.

•To use an AC adapter (sold separately), plug it into the DC IN 5V jack.

•The indicator at the right side of the display shows the battery’s charging status. It lights orange while charging and goes out when charging is complete.

Battery indicator

TASCAM MP-BT1