System requirements

See the TASCAM website for updated information about OS compatibility.

Windows

Windows XP 32-bit SP2 or later (Excluding Media Center Edition)

Windows XP 64-bit SP2 or later Windows Vista 32-bit SP2 or later Windows Vista 64-bit SP2 or later Windows 7 32-bit

Windows 7 64-bit

3 − Installation

•• An Internet connection (for registration of Cubase LE 5)

For Macintosh systems as well, additional memory and a faster hard disk drive will facilitate smoother and easier operation of digital audio application software.

Connecting the power

Confirm in advance that the unit’s STANDBY/ON switch is set to STANDBY. Connect the included TASCAM PS-1225L AC adaptor to the unit and a power source as shown below.

Supported computer system:

Windows compatible computer with a USB 2.0 port

TASCAM PS-1225L

AC outlet

•• CPU/clock:

Pentium 4 1.4 GHz or faster AMD Athlon 1.4 GHz or faster (or equivalent processor)

•• Memory:

512 MB or more for Windows XP 32-bit and Windows Vista 32-bit

1 GB or more for Windows XP 64-bit, Windows Vista 64-bit and Windows 7 32-bit

2 GB or more for Windows 7 64-bit

•• DVD-ROM drive (for the installation of the drivers/ Cubase LE 5)

•• An Internet connection (for registration of Cubase LE 5)

NOTE

Although this product has been checked for use with typical computers that meet the above operating requirements, we cannot guarantee that it will operate with all computers that meet these requirements. Please be aware that even under the same conditions, processing capability may vary depending on differences of the design and system.

Mac OS XSupported operating system:

Mac OS X v10.5.8 for Intel processor, or Power PC G4 Mac OS X v10.6 or later for Intel processor

Supported computer system:

Apple Macintosh series equipped with a USB2.0 port as standard equipment

•• CPU/clock:

Intel processor, or Power PC G4

•• Memory:

1 GB or more

•• HDD:

1 GB or more free space

•• DVD-ROM drive (for the installation of the drivers/ Cubase LE 5)

DC plug

Use the hook (cord holder) on the rear panel to secure the AC adaptor cord. When connecting the cord to the unit, wrap it through the holder to prevent it from becoming disconnected during use.

CAUTION

Always use the TASCAM PS-1225L AC adaptor that was shipped with the unit because it matches the unit’s requirements. Using a different AC adaptor could cause malfunction, overheating, fire or other problems.

Installing the driver

In order to use the US-1800, you must install the appropriate driver into your computer. As described below, this is an easy process using the CD-ROM included with the US-1800.

Driver are updated from time to time. You can download the most recent version of the driver from the TASCAM website <http://www.tascam.com/>.

Do not connect the US-1800 to your computer before you have installed the driver.

TASCAM US-1800 9