![](/images/new-backgrounds/1276719/27671933x1.webp)
Service:
- The appliance has been oiled in ori- gin. In order to maintain the applian- ce in a good operation conditions we suggest greasing the blades every time you clean it by putting a few drops of oil on the ends of the blade, and finally switching on the appliance during a few seconds.
-It is recommended to replace the outer foil once per year.
-It is recommended to replace the inner cutter once every two years.
-Make sure that the appliance is serviced only by specialist personnel, and that only original spare parts
or accessories are used to replace existing parts/accessories.
-Any misuse or failure to follow
the instructions for use renders the guarantee and the manufacturer’s liability null and void.
Charging the battery
Caution: A new battery is not fully charged and must therefore be char- ged before the appliance is used for the first time.
- Charge the battery at an atmosphe- ric temperature of between 4 and 40ºC.
-Make sure that the power is off before charging.
-Connect the USB interfaces of shaver and charger by data line, then plug the adaptor (K) into the mains (Fig. 1)
-A pilot light will come on to indicate that the appliance is being charged. Approximately 8 hours are needed for a complete charge of the battery. Never attempt to over charge the battery (although it is recommended
that the first charge of the battery be of 10 hours in duration).
- When the battery is charged dis- connect the adaptor from the mains supply.
NB: Do not use the appliance while it is connected to the charger.
USB charge
-Please make sure that the power is off before charging.
-Connect the USB interfaces of shaver and computer by data line for charging (Fig. 2)
-A pilot light will come on to indicate that the appliance is being charged. Approximately 8 hours are needed for a complete charge of the battery. Never attempt to over charge the battery (although it is recommended that the first charge of the battery be of 10 hours in duration).
-When the battery is charged discon- nect the computer data line.
NB: Do not use the appliance while it is connected to the charger.
Instructions for use
Before use:
-Make sure that all the product’s packaging has been removed.
-Ensure that the selected tension on the voltage selector coincides with the tension of the mains.
-Before using this product for the first time, it is important to make a full charge of batteries.
Use:
-Remove the protective cap (A).
-Turn the appliance on, by using the on/off switch.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Manual |
| 18/07/11 |
| 19:12 | |||||||
|
|