Taylor 1506 instruction manual Disconnected Signals, Color Bar Graphs, Trouble-Shooting

Models: 1506

1 14
Download 14 pages 3.08 Kb
Page 12
Image 12
Color Bar Graphs

Color Bar Graphs

The color graphs are designed as an intuitive way to gauge the weather at a glance. The left color bar graph represents the respective Indoor/Outdoor temperature, heat index or dew point of the current display mode. The right graph represents the respective Indoor/Outdoor humidity. As the measurements change, the number of illuminated bars changes automatically.

Trouble-Shooting

Disconnected Signals

If the receiver unit does not receive a transmission from a remote unit channel for 1 hour, the display will show dashes. To correct this problem:

1.Go to the remote location of that channel to check that the unit is properly positioned, within the appropriate transmission range.

2.If new batteries are faulty on the initial installation, install fresh batteries. If you did not notice the Low Battery icon warning and the product performed correctly after initial set up, the batteries have lost their charge. Replace batteries (see the Power Sources section of this manual.)

3.Check to make sure the transmission path is clear of obstacles

and interference.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

Modifications not authorized by the manufacturer may void users

authority to operate this device.

11

Page 12
Image 12
Taylor 1506 Disconnected Signals, Color Bar Graphs, Trouble-Shooting, Reorientor relocate the receiving antenna