Taylor 1526 instruction manual PTransmissioblemSonlvingCollision

PTransmissioblemSonlvingCollision

Signals fro other household devices,such as doorbells, home security

systems and entry controls,may interfere.This is normal and does not affect the general performance of this product.The transmission will

resume once the i terference recedes.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These li its are designed to provide reasonable protection against

ha mful interference in a residential installation. This equipment gen- e ates, uses and ca radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful in- te ference to radio communications. However,there is no guarantee that int rference will not occur in a particular installation. If this equip- ment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the

foll wing easures:

--Reori nt or relocate the receiving18 antenna.

--Increase the separation between the equipment and receiver. Modifications not authorized by the manufacturer may void users authority to perate this device.

1. If the LCD readout is faint, replace the batteries.

2. If outdoor temperature does not display on the base unit: a) Remove and reinstall all batteries;

b) Use fresh batteries ;

c) Place the remote sensor closer to the base unit;

d) Position the base and remote so that the transmission

path is free of any obstacles, such as buildings, trees, etc.Try to have no more than 2 or 3 walls between the units.

3. The temperature sensors are manufactured to the accurate within plus or minus one degree, so 2 units placed next to each other may report different readings.This is a normal occurrence with digital sensors and should not be considered a defect.