5
050817
Safety
Weat TaylorCompany are concerned about the safetyof the
operatorwhen he or she comes in contact with the freezer
andits parts.Taylorhas gone to extreme effortsto design and
manufacturebuilt-in safety features toprotect both you and
theservice technician. As an example, warninglabels have
been attached to the freezer to furtherpoint out safety
precautionsto the operator.
IMPORTANT --Failure to a dhere to the following
safetyprecautions may result in severepersonal injury.
Failureto comply with these warnings may also damage the
machineand its components.Component damage will result
inpart replacement expense and service repair expense.

To OperateSafely:

DO NOT operate the freezerwithout reading this
operator’smanual.Failure to followthis instructionmay result
in equipment damage, poor freezer performance, health
hazards,or personal injury.
SDONOT operate the freezer unless it is properly
grounded.
SDONOT attempt any repairs unless the main
powersupply to the freezer has been
disconnected.
SDONOT operate the freezer with larger fuses
thanspecified on the freezer data label.
Failuretofollow these instructions mayresult in electrocution
or damage to the machine. Contact your localauthorized
TaylorDistributorfor service.
DONOT use a water jet to clean or rinse thefreezer.
Failure to follow this instruction may result in serious
electricalshock.
SDONOT allow untrained personnel to operate
this machine.
SDONOT operate the freezer unless all service
panelsand access doors are restrained with
screws.
SDONOT remove the door, beater and blades, or
driveshaft unless all control switches are in the
OFFposition.
SDONOT put objects or fingers in door spout.
Failure to follow these instructions may result in
contaminatedproduct or severe personal injuryto fingers or
handsfrom hazardous moving parts.
USE EXTREME CAUTION when removing the
beater assembly.The scraper blades are very sharp and
maycause injury.
This freezer must be placed on a level surface.
Failureto comply may result in personalinjury or equipment
damage.
DONOT obstruct air intake and discharge openings:
Aminimumof 6” (152 mm) air space is required on both sides
and rear,and 4--1/4” (108mm) on bottom. Failure to follow
this instruction may cause poor freezer performanceand
damageto the machine.
This freezer is designed to operate indoors, under normal
ambient temperatures of 70_--7 5 _F(21_--2 4 _C). The
freezer has successfully performed in high ambient
temperaturesof 104_F(40_C)at reduced capacities.
NOISELEVEL: Airbornenoise emission does not exceed 78
dB(A) when measuredat a distance of 1.0 meter from the
surfaceof the machineand at a heightof 1.6 meters fromthe
floor.