Taylor 516 instruction manual General Operation

General Operation

1.Press the “Ent” (Enter) button turn the unit on.

2.Your thermometer is preset to read temperatures in Fahrenheit. To switch to Celsius, press and hold the “S/S”

(Start/Stop) button for 3 seconds.

3.Press the “Ent” button to access the Tea Selection screen.

4.Press the “+” or “-“button to scroll through 7 types of teas (White, Green, Oolong, Black, Herbal, Pureh, Darjeeling).

Note: Each Tea Screen displays a flashing Tea Icon, a temperature, and a time. These indicate the preset hot water temperatures and steep times associated with that particular blend of tea.

5.Press “Ent” to select a tea choice. The preset target water temperature digits blink.

6.Press “Ent” to select the displayed temperature. The steep timer digits blink.

Note: The target water temperature can be adjusted in increments of 1°. To change the desired temperature, press the “+” button to increase or the “-“ button to decrease the temperature. Press “Ent” to select the desired temperature when it appears on the screen. The steep timer digits blink.

7.Press “Ent” to select the displayed steep time. The target water temperature and steep time are set.

Note: The steep time can be changed.

A. To increase the steep time: Press the “+” button to increase the minutes. Press the “-“button to increase the seconds.

B. To decrease the steep time: Press the “+” button until the minute digits cycle past “9” back to zero, then continue to press the button until the desired minute appears. Press the “-”button until the second digits cycle past “59” back to zero, then continue to press the button until the desired seconds appear. Press and hold the buttons to advance the digits quickly. (The timer will time up to 9 minutes and 59 seconds).