Taylor 91756 user manual Setting the Alarm Time, De-activating the Alarm, Activating the Alarm

ALARM CLOCK WITH SNOOZE

Setting the Alarm Time

Two different alarm times can be set, Alarm 1 and Alarm 2. Use MODE to scroll to Alarm 1 (A1) or Alarm 2 (A2).

•To set Alarm 1; In normal time display, press the MODE button once and the Alarm 1 time and (A1) will show.

•Press the SET/AL button for 3-4 seconds until the alarm hour flashes

•Press UP or DOWN to set the alarm hour

•Press SET/AL and the minutes will be flashing

•Press UP or DOWN to set the alarm minutes

• Press SET/AL to lock in the settings. The alarm is now activated and the alarm bell icon	will show next
to the time.

•Press MODE to get to Alarm 2 or to return to normal time display

•If no buttons are pushed within 20 seconds, the unit will revert to the normal time display automatically

•To set Alarm 2; When Alarm 2 (A2) is showing on the display, follow the same setup sequence as for Alarm 1.

De-activating the Alarm

To de-activate an alarm, press MODE to choose the alarm (A1 or A2) that you want to de-activate. Press SET/AL until the alarm bell icon is no longer showing. Your alarm time settings will remain and you can re-activate the alarm by following the instructions below.

Activating the Alarm

Press the MODE button to choose the alarm (A1 or A2) that you want to activate. Press SET/AL to activate (the alarm bell icon and 1 or 2 will show). The alarm will sound at the time you have entered.

Silencing the Alarm

•When the alarm sounds press any button on the base station to silence the alert or press SNOOZE to activate the snooze function

•When snooze is activated the Zzz symbol will appear and the alarm will sound again in 5 minutes

•When the alarm sounds again, press SNOOZE to continue the snooze function or press any button on the base station to discontinue snooze

•The alarm icon will remain on the display and the alarm will sound every day at the pre-set time until the alarm is de- activated

MAX / MIN MEMORY

Use the MAX/MIN button to display the highest and lowest indoor and outdoor temperature and humidity readings since the last reset.

•Press MAX/MIN once to display the highest readings recorded since last reset. MAX is shown on the display.

•Press MAX/MIN a second time to display the lowest readings recorded since last reset. MIN is shown on the display.

•Press MAX/MIN to return to the normal display

•To clear and reset the max/min records, when either the MAX or MIN record is shown on the LCD display, press and hold MAX/MIN for 3-4 seconds until the beep sounds

TEMPERATURE ALERTS

You can program your weather center to sound an alert whenever the indoor or outdoor temperature exceeds the upper or lower pre-set level. The outdoor alert can be set for any remote channel.

Setting the Indoor Temperature Alert

•Press and hold the ALERT button for 3-4 seconds. The high temperature limit icon and indoor temperature will be flashing.

•Press UP or DOWN to select the high temperature alert level

•Press ALERT and the low temperature limit icon and temperature will be flashing

Page 4