19
Model C707 Operating Procedures
050112
Step 5
Press the WASH key. This will cause the sanitizing
solution in the freezing cylinder to agitate. Allow it to
agitate for five minutes.
Figure 23
Step 6
With an empty pail beneath the door spout, raise the
prime plug.
Figure 24
Step 7
When a steady stream of sanitizing solution isflowing
from the prime plug opening in the bottom of the
freezer door, pull thedraw handle down. Draw off all of
the sanitizing solution.
Figure 25
Step 8
Once the sanitizer stops flowing from the door spout,
raiset he draw handle. Press the WASH key,cancelling
the beater motor operation.
Figure 26
Note: Be sure your hands are clean an d sanitized
before continuing theseinstructions.
Step 9
Lubricate the mix feed tube o--rings located on the end
of the tube with the small hole on the side. Stand the
mix feed tube in the corner of the mix hopper.
Figure 27