TDK NB-59S-09S-0 specifications NB-80E-01 TYPE, MOUNTINGS Reference, Features, 1.NB-514S TYPE

Models: NB-59S-09S-0

1 4
Download 4 pages 41.24 Kb
Page 3
Image 3
NB-80E-01 TYPE

NB-80E-01 TYPE

(3/4)

MOUNTINGS (Reference)

FEATURES

Compact, with highly reliable circuitry.

Separate transducer and drive circuit sections provide superior layout versatility.

Because the ultrasonic frequencies used are higher than with typical household-type units, mist particle size is extremely fine. This part is thus ideal for products intended for smaller spaces.

SHAPES AND DIMENSIONS

1.NB-514S TYPE

O-type

ring

ø39.2±0.2

 

Chamber

base

11.5

7.5

9

 

 

Transducer

29max.

43.5max. 32±0.2

7 for NB-58S

Dimensions in mm

2-ø3.5

32.5±0.2

40±0.2

ø24±0.4 ø18±0.3

MOUNTINGS (Reference)FEATURES1.NB-514S TYPE2.NB59S, NB-80E TYPES31.5max.

18max.

120±15

4.5max.

 

A 39.2mm diameter hole is formed in the bottom of the water chamber, which is connected using an O-type ring.

Water level is determined relative to the center of the transducer.

Screw holes are provided at four locations (refer to the technical materials) for mounting.

Note: A strong O-type ring should be used for long-term use.

2.NB59S, NB-80E TYPES

 

 

 

20.75±0.2

 

 

 

 

 

 

 

53±0.2

 

 

 

9.5max.

 

 

 

65max.

 

2-R15.6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TYPE NB-80E-01

 

 

21max.

26max.

 

 

2-ø4.5±0.2

NO.

63C

0.2

4123

TU-51X-H

 

 

 

 

 

 

 

2-R5.5

 

 

 

 

 

1±

 

 

Connector for VR(3 poles)

5max.

 

Dimensions in mm

3022-03A

 

 

 

Housing

Connector for power supply(2 poles)

5224-03CHPB

3022-02A

 

Maker: Molex

5224-02CHPB

 

A

ø24

ø18

Tank base

Rubber packing

Plastic case (Metal case)

Screw:M415

Dimensions in mm

• All specifications are subject to change without notice.

The transducer can beak off if the A dimension depth is shallow. TDK recommends a 2mm A-dimension depth and a screw tighten- ing torque of 0.6N • m.

3.CONSTRUCTION OF NB59S

The drawing below shows an example method for transistor heat dissipation. The attached aluminum cooling fins should fixed using silicon rubber to a metallic water tank, etc. with sufficient head dis- sipation capacity.

(It is recommended to use a plastic water tank. However, if a metallic water tank is absolutely must be used, be sure to insulate it from the power supply line.)

Metal tank

 

 

P.C. board

 

 

 

 

 

 

 

 

 

Silicon rubber

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Transducer unit

Aluminum radiation board

002-01 / 20080731 / ef441_nb

Page 3
Image 3
TDK NB-59S-09S-0 specifications NB-80E-01 TYPE, MOUNTINGS Reference, Features, 1.NB-514S TYPE, 2.NB59S, NB-80E TYPES