4 − Playback operations
Selecting by track number
Using the number keys on the remote control, the number of the desired track can be entered directory. Even numbers with two or three digits can be entered easily. For example:
You can also enter the track number and start playback by pushing the MULTI JOG dial or using the ENTER key.
NOTE
After input, press the PLAY key to start playback. Or, the READY key to cue the track at its head position and enter playback standby mode.
This function cannot be used in Program or Random mode.
Track search
Normal search
Press the ∆/˚ search key continuously on the front panel, or the SEARCH ∆/˚ key on the remote con- trol. To stop the search function, simply release the ∆ /˚ or the SEARCH key.
NOTE
The search function does not operate with MP3 discs.
Direct search
By specifying time from the start of a certain track, you can start playback from a specified point of a specified track.
ªBasic operation
During stop, play or playback standby modes, use the number keys on the remote control to input the three- digit track number (such as 002 for track 2), then the desired elapsed time (***min **sec) from the start of that track.
Example: To specify 1 min 30 sec from the start of track 2, input “002 001 30”.During input, the counter in the display will flash.NOTE
Regardless of the time display mode (see “Time display switching on page 20), the time from the start of the specified track is displayed.
During stop or playback modes, when the final digit is entered, the desired position is automatically located and playback will begin from the desired point. During playback standby mode, at the desired point the unit will enter playback standby mode.
NOTE
If a point which does not exist is entered, Direct Search time entry mode will be cancelled.
The direct search function cannot be used in program or random mode.
For MP3 discs, time cannot be specified within a track. However, if you input the
18 TASCAM