4 − Playback operations

Auto Cue function

When the auto cue function is on, when a track is select- ed, the point where sound begins (not where the track begins) on that track is located, and the unit enters playback ready mode. Then, when the PLAY key is pressed, playback begins at exactly that point.

Press AUTO CUE key on the front panel or remote control to set the function on. The A.CUE indicator will light up.

Use the A_CUE LEVEL option to set the sound start position detection level.

Auto Ready function

This function allows the playing back a single track, and the automatic cuing of the next track ready for playback.

Combained with Auto Cue function, the unit will enter playback ready mode at the start of the next track.

Press AUTO READY key on the front panel or remote control to set the function on. The A.READY indicator will light up.

Incremental playback

In this function, when the unit is in playback mode, and when the PLAY key is pressed, the unit starts playback from the beginning of the next track.

Use the Menu option or the INC PLAY key on the remote control to set this mode on. The TRACK indicator will blink during playback or playback ready mode.

When the STOP key is pressed, the unit will enter playback ready mode at the start of the next track.

Call function

Call function allows the unit’s playback position to be returned to the point at which playback last started from ready mode. If there is no “call point”, an error message NoCall PT!! will be displayed.

NOTE

This function cannot be used with program, random and MP3 playback mode.

End of disc/track message (EOM)

When nearing the end of a track or disc, the EOM indicator will light up on the display.

The number of seconds (1 to 99) before the track/disc end that the indicator is displayed can be set beforehand.

To set the message display time, use the EOM TRK or EOM DISC options on the PLAY sub-menu (see

“Operation basics” on page 16).

NOTE

This function cannot be used with MP3 playback mode.

International Standard Recording Code (ISRC)

When in playback or playback ready mode, if the FAINALIZE key is pressed, the display shows “ISRC” code on the screen. If there is no “ISRC” code on the

disc or the code has not been recorded on the disc, Incomplete! will appears on the display.

Recorder Identification Data (RID)

When in playback or playback ready mode, if the ERASE key is pressed, the display shows “RID” code on the screen. If there is no “RID” code on the

disc or the code has not been recorded on the disc, Incomplete! will appears on the display.

TASCAM CD-RW901 23