HSkip/Search (.m/,/), TUNING (
) In CD mode, use these buttons to skip tracks.
Hold down these buttons to search for a part of a track. In FM/AM mode, use these buttons to tune in a station.
IRECORD
Use this button to enter record pause mode.
JCD operation buttons PLAY/PAUSE (y/J)
Use this button to start or pause playback or recording.
STOP (H)
Use this button to stop playback or recording.
KSpeakers (stereo)
LOPEN/CLOSE (L)
Use this button to open or close the disc tray.
MRemote Sensor
When operating the remote control unit, point it toward the remote sensor.
NVOLUME
Turn this knob to adjust the volume.
ODisc Tray
PREC LEVEL
In record pause mode, use this knob to adjust the recording level.
QPHONES
When you use headphones, first reduce the volume level to minimum. Then, insert the plug from your headphones into the PHONES jack, and turn the volume up gradually by turning the VOLUME knob.
<Do not turn the unit on or off, or insert or pull out the headphones jack while wearing the headphones.
(Excessive sounds may occur from the headphones.)
<The sound from speakers will be cut off while the headphones are plugged in.
The following buttons are provided only on the remote control unit.
RPROGRAM
In CD mode, use this button to program tracks.
SCLEAR
In CD mode, use this button to clear the program you set.
TREPEAT
In CD mode, use this button to select a repeat mode setting.
UDISPLAY
In CD mode, use this button to change the display.
VSHUFFLE
In CD mode, use this button for shuffle playback.
Note:
To simplify explanations, instructions in this document refer to only the names of buttons and controls on the front panel, making no mention of the use of remote control unit.
Basic Operation
1Press the POWER button to turn the unit on.
2Select a source by pressing the corresponding button.
<To listen to an external source connected to AUX jacks, select AUX by pressing the PHONO/TAPE/AUX button once or twice.
3Play the source, and adjust the volume by turning the VOLUME knob.
13
ENGLISH