Listening to a CD

1Press the CD button.

“--” blinks for a few seconds.

When no disc is set, “nO dISC” appears on the display.

2Press the OPEN/CLOSE button (L) to open the tray.

3Place a disc on the tray with the printed label face up.

<Never place more than one disc on the tray.

<The disc must be placed in the center of the disc tray. If the disc is not correctly loaded, it may not be possible to open the tray again once it has closed, so you should ensure the disc is always centered on the tray.

<Do not force the tray by hand during opening and closing operations.

4Press the OPEN/CLOSE button (L) to close the tray.

<Be careful not to pinch your finger.

<It takes a few seconds for the unit to load the disc. No buttons will work during loading. Wait until the total number of the tracks and the total play time of the disc are displayed.

disc type indicator

total number of the tracks

total play time of the disc

<The disc type indicator shows the type of disc currently loaded.

CD:

Acommercial pre-recorded CD

CD-R:

A finalized CD-R

CD-RW:

A finalized CD-RW

NO TOC CD-R:

A CD-R which has yet to be finalized

NO TOC CD-RW:

A CD-RW which has yet to be finalized blank:

No disc or unreadable disc

Note that, when a non-audio disc is inserted, the unit may start playing after detecting the disc data, but that it makes no sound.

5Press the PLAY/PAUSE button (y/J) to start playback.

Disc playback starts from the first track, and y lights on the display.

<If you load the disc, and then press the PLAY/PAUSE button (y/J) without having first closed the disc tray, the disc tray closes and playback starts.

18