Programmed Playback
Up to 32 tracks can be programmed in the desired order.
< Insert a disc and select “CD” before beginning programming.
< Shuffle playback does not work during programmed playback. < Programmed playback works with finalized discs only.
1 Press the PROGRAM button in the stop mode.
“PROGRAM” indicator and “P” blink on the display.
2Press the .or /button to select a track.
Repeat steps 2 and 3 to program more tracks.
<To select the same track consecutively, press the PROGRAM button again.
<You can program up to 32 tracks.
<To cancel the program mode, press the STOP button (H).
<You cannot select the track which does not exist in the disc.
4When the selection of track numbers has been finished, press the PLAY/PAUSE button (y/J) to start program playback.
“PROGRAM” indicator stops blinking.
To check the programmed order
In the stop mode, press the . or / button repeatedly to show the track numbers that have been stored in memory.
To erase a track, press the CLEAR button when the number is displayed. After deletion, the next track number will be moved up.
track number
3Press the PROGRAM button.
The track is programmed, and “P” stops blinking. If you select another track, “P” starts blinking again.
20