Using the audio timer

T h i s u n i t c a n s t a r t a n d s t o p r e c o r d i n g t o g e t h e r w i t h t h e commercially available audio timer.

<Connect the unitÕs power cord to the outlet of the audio timer before setting.

1Set the unit’s ON/OFF times with the audio timer.

Refer to the instruction manual of audio timer for operations.

2Turn on the audio timer outlet.

Refer to the instruction manual of audio timer for operations.

3Set the recording time.

Follow the steps 1 to 5 on page 30.

4Turn off the audio timer outlet.

Refer to the instruction manual of audio timer for operations.

The unit will turn on and the recording will start when the audio timer reaches the ON time.

When recording starts, the REC OFF timer and the remaining time display will start to change.

Recording will stop when reaches to Ò00:00Ó.

The unit will turn off when the audio timerÕs reaches the OFF time.

Caution when using the audio timer

<When a CD-R or CD-RW disc is loaded, it will take approximately 30 seconds after the unit turns on to read and start recording.

Set the on time of the audio timer approximately 1-2 minutes before you want to start recording.

<The unit will automatically start finalize when the disc reaches the end during recording. If the power turns off during recording, the error will occur and the disc will be no usable. When the audio timer is used, set the off time of the audio timer 3 to 5 minutes longer than the recording time of the unit.

Refer to the following example to set the recording time of the unit and off time of the audio timer.

AM7:59:00

<Audio timer reaches on time

<Unit turns on

After disc reading

 

< Recording timer starts

AM8:00

< Recording starts

00 Sec.

60 Sec.

Display shows the recording time Ò65:00Ó.

UnitÕs finishes working: Including time for finalizing, etc.

While the recording time decreases from Ò65:00Ó to Ò00:00Ó.

ENGLISH

AM9:00

AM9:04

W h e n t h e d i s p l a y s h o w s Ò00:00Ó

<Recording time finishes

<Recording finishes

AM9:08:00

<Audio timer reaches the off time

<Unit turns off

If you want to record an FM radio program from ÒAM8:00Ó to ÒAM9:00Ó, set the recording time of the unit to Ò65:00Ó first, then set the ON time of audio timer to ÒAM7:59Ó and OFF time to ÒAM9:08Ó.

Once the audio timer reaches the on time, the unit will turn

on and the disc will be read. Approximately 30 seconds later, r e c o r d i n g w i l l s t a r t . A t t h e s a m e t i m e , t h e d i s p l a y f o r t h e recording time will start to decrease, and recording will stop when the display shows Ò00:00Ó. The unit will turn off when the audio timer reaches the off time.

31