Recording of FM Transmissions

If a transmission should be recorded from the internal FM radio the A-B/R button has to be pressed. Source is set to FM. Set the respective values (see next section). After selecting Record recording of the actual transmission starts by pressing M. Pressing A-B/R stops recording.

Recording can be stopped and resumed at any time by press-

ing (symbol ).

If FM recording Fxxx.WAV files are stored in the directory FM.

LINE-IN Recording

Connect LINE-IN with an external audio device (i.e. cassette recorder, CD player etc.). Select Record in the main menu. The sub menu includes the options Source, MO/ST (Mono/Stereo), Encode, sRate, Record and Cancel. ￿ and ￿ are used to navigate through the options and with the M button the selection is confirmed.

Source allows to select the audio source (MIC = microphone, LineIn for all other audio devices). MO/ST allows to toggle between Mono and Stereo. Use Encode to set the formats IM ADPCM (4 Bit), MS ADPCM (4 Bit) or PCM (16 Bit). sRate is used to set the sample rate to 8KHz/11KHz/16KHz/22KHz/32KHz. Pressing M with selecting Record starts recording while Cancel stops the whole process.

Select LineIn, start the external audio device and select Record on the MP-350 with M. The unit starts recording immediately. Pressing A-B/R stops recording.

Recording can be stopped and resumed at any time by press-

ing (symbol ).

If line in recording Lxxx.WAV files are stored.

Note:

Check the recording volume for example with an earphone.

GB – 17 MP-350