Recording 1

 

 

 

 

 

 

1

 

4

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5 2 2

Audio from the PHONO or AUX sources can be recorded on the CD recorder.

1Press the PHONO/AUX button once or twice to select the source to be recorded.

To record a record, select PHONO.

To record an external source connected to the AUX IN jacks, select AUX.

2Load a recordable CD-R or CD-RW disc into the unit.

Press the OPEN/CLOSE button (L), place a disc on the disc tray with the printed label side up, and then press the OPEN/CLOSE button (L) to close the disc tray.

Make sure “NO TOC” and “CD-R” (or “CD-RW”) indicators

lights on the display, or the RECORD button in step 4 will not work.

3Select the mode of track number assignment using the MANUAL/AUTO REC button of the remote control unit.

When the MANUAL/AUTO REC button is pressed once, the current mode is displayed. Press the MANUAL/AUTO REC button repeatedly to select any other mode.

– – (MANUAL)

The unit doesn’t divide tracks.

Use the TRACK INCREMENT button to divide tracks. MANUAL is recommended for recording an analog source such as a record.

–20db, –30db or –40db (AUTO REC)

The unit will automatically insert a track division in the recorded material when the sound level has dropped below the threshold for more than 2 seconds, and sound has re- started.

“–20db” takes a louder signal to trigger the track increment. “–40db” means that a relatively quiet signal will trigger the track increment. “–40db” is suitable for recording a noiseless source such as a CD.

<AUTO REC may not work properly with analog sources that contain low-level noises.

<The AUTO TRACK indicator lights when –20dB, –30dB or –40dB is selected.

<The default setting is MANUAL (off). When the unit is turned on, or when the disc tray is opened, the setting is automatically reset to MANUAL (off).

<The MANUAL/AUTO REC button doesn’t work during recording or in the record pause mode.

20