4Press the RECORD button.

The red indicator on the RECORD button lights.

“REC” and J indicators on the display will light, and the unit enters record pause mode.

<No button will work while “busy” is displayed. Wait a few seconds until “busy” disappears from the display.

<If the red indicator on the RECORD button doesn’t light, reload a recordable disc, wait a few seconds until “NO TOC” and “CD-R” (or “CD-RW”) indicators light on the display, and press the RECORD button again.

5If necessary, adjust the recording level using the REC LEVEL knob.

Play the source to be recorded and adjust the recording level so that the loudest sound does not exceed the “OVER” indicator on the peak level meter.

The level can be adjusted from –00 (–∞) dB to 18 dB.

6If PHONO is selected in step 1 , gently lower the tone arm onto the edge of the record (or the track to be recorded).

When the turntable is stopped, the PLAY or the PAUSE button will not work and you cannot start recording.

7Press the PLAY or the PAUSE button to start recording.

8If AUX is selected in step 1 , play the source to be recorded.

When the playback of the source has been finished, press the STOP button to stop recording.

When the rotation of the turntable stops, the recording will stop automatically.

But to prevent unwanted noise from the tone arm being recorded, stop the recording manually by using the STOP button.

21