Listening to the Radio
12
1Select “FM” or “AM” using the FUNCTION button.
2Select the station you want to listen to (auto selection).
Hold down the Skip button (.or/) for more than 2 seconds and release it when the frequency display begins to change.
When a station is tuned in, the tuning process will stop automatically.
<To stop the auto selection, press the Skip button.
Selecting stations which cannot be
tuned automatically (manual selection) When the Skip button (.or/) is pressed momentarily the frequency changes by a fixed step.
Press the Skip button repeatedly until the station you want to listen to is found.
If the reception is poor
For the best reception, rotate the FM or the AM antenna until you get stations clearly.
FM MODE button
Pressing this button alternates between Stereo mode and Mono mode.
Stereo
FM stereo broadcasts are received in stereo and the “STEREO” indicator lights in the display.
<If the sound is distorted and the “STEREO” indicator flashes, the signal is not strong enough for good stereo reception. In this case, change to MONO mode.
Mono
To compensate for weak FM stereo reception, select this mode. Reception will now be forced monaural, reducing unwanted noise.
18