Teac SR-LX5i manual 20

Timer

.//

ALARM 1, ALARM 2

<The unit can be programmed to turn on at a specified time. The unit will Standby after 120 minutes of reaching the specified time.

<The unit can be set two different timer setting separately.

<Adjust the clock before setting the timer (see page 11).

Setting the timer

1Press and hold the ALARM 1 or ALARM 2 button for more than 2 seconds.

The clock and the Timer indicator ( or ) blinks on the display.

<If no button is pressed for about 8 seconds, the timer setting mode will be canceled.

2Press the Skip buttons (. or /) to set the hour, and then press the ALARM 1 or ALARM 2 button.

3Press the Skip buttons (. or /) to set the minute, and then press the ALARM 1 or ALARM 2 button.

4Select a source using the Skip buttons (.//), and then press the ALARM 1 or ALARM 2 button.

<To use buzzer, select “ ”.

5Set the volume using the Skip buttons (.//), and then press the ALARM 1 or ALARM 2 button.

The volume for timer operation is adjustable from 5 to 40.

Setting the timer is now completed.

20