Remote Control Unit
The provided Remote Control Unit allows the unit to be operated from a distance. When operating the remote control unit, point it towards the remote sensor on the front panel of the unit.
<Even if the remote control unit is operated within the effective range, remote control operation may be impossible if there are any obstacles between the unit and the remote control.
<If the remote control unit is operated near other products which generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the other products may also operate incorrectly.
Battery Installation
1.Remove the battery compartment cover.
2.Put in the lithium battery (CR2032, 3V).
3.Close the cover.
Battery Replacement
If the distance required between the remote control unit and main unit decreases, the battery is exhausted. In this case, replace the battery with a new one.
Precautions concerning batteries
Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire.
Display
A
B
C
D
E
F
K |
| J |
| I |
| H |
| G |
ALights when the DBSS HI/LO button on the remote control is pressed.
BLights when video output is on.
CLights when the sleep function is active.
DLights in preset tuning mode.
ELights when the snooze function is active.
FShows the digital clock, sleep time or preset channels or current DBSS level.
GLights when an FM stereo broadcast is tuned.
HLights when the timer is on.
IShows frequency, volume, date, etc.
JWhen the unit is on, one of these indicators lights to show the current source.
KLights for an option (buzzer) in the timer source selection.
ENGLISH
5