Identifying the Parts

A

B

C

D

E

F

APOWER

Press this button to turn the unit on and off.. The blue indicator lights when the unit is turned on..

BSOURCE

Each time this button is pressed, the source changes..

CInput indicators

The source being selected lights up..

Blinks when the input signal is not digital audio data or the format of the audio signal is not compatible with this unit, such as Dolby Digital, dts, or AAC..

DFrequency indicators

The sampling frequency of the signal being input lights up..

These indicators will blink when there is no input signal or the input signal cannot be locked..

*If the sampling frequency of the input signal is 32 kHz, the frequency indicators do not light up, but the input indicators do..

EPHONESFPHONES LEVEL

Insert the headphone plug (stereo standard) into the headphone terminal (PHONES), and gradually adjust the volume with the volume control (PHONES LEVEL)..

Be sure to set the volume to the minimum level before putting on the headphones.. Do not turn on/off the power or plug/unplug the headphones while wearing them.. Doing so may cause a loud sound to be suddenly emitted and cause hearing loss..

8