Tech4o Altimeter Watch manual Stopwatch Mode Setting, Stopwatch Mode Using the Stopwatch

measuring unit changes to 1 second and the measuring range is 99 hours, 59 minutes, 59 seconds.

5.1Stopwatch Mode - Setting

•In stopwatch mode, press and hold the [s/+] button for two seconds.

•The LAP/INT indicator will flash.

•Both LAP and intermediate settings will record time the same way, but the way the information is displayed will vary. The LAP setting will show the just the last lap time when the [s/+] or [o/o] buttons are pushed and in the stopwatch history. The Intermediate setting will show the cumulative intermediate times when the [s/+] or [o/o] buttons are pushed while in stopwatch history mode.

•Press the [o/-] button to select between Lap and int settings. Press the [o/o] button to confirm.

5.2Stopwatch Mode - Using the Stopwatch

How toPress Stopwatch:

• When in stopwatch mode, press the [o/o] button to start the

10

stopwatch. The top row will now display -------------	and the
bottom row will display the current stopwatch time.

•Press the [o/o] button again to stop the stopwatch. The top and bottom rows will now display current stopwatch time.

•Press the [o/o] button again to resume the stopwatch. The top row will now display -------------and the bottom row will display the current stopwatch time.

•While the stopwatch is running, users may enter lap/int times by pressing the [s/+] button. The top row will now display first lap/int time and the bottom row will display the cumulative stopwatch time.

•After each successive lap/int time is entered, the top row will display:

* the cumulative time of all the entered intermediate times if the int setting was selected or;

* the last lap time if the lap setting was selected.

•The bottom row will display the cumulative stopwatch time.

•When the stopwatch is stopped, press the [o/-] button to proceed to the stopwatch history mode or press [s/+] to

continues

11